Nick
NAXJA Member #690
- Location
- Sudbury, MA
Does anyone know what type of transfer case would be on a 1996 with an inline six? (XJ Classic,4 door)
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Transfercase model?
- Thread starter Nick
- Start date
BobCSmith
NAXJA Forum User
- Location
- Phoenix, AZ
I was just getting ready to post the same type question:
I have a 91' automatic 4.0 HO...how can I tell which transfer case I have?
I have a 91' automatic 4.0 HO...how can I tell which transfer case I have?
Drewlee77
NAXJA Forum User
- Location
- Abilene, TX
You either have the NP231 or the NP242. If you have a "Full-Time 4wd" selection then you have the 242, if you only have part time then it's the 231. On the 91 model you will also have the 231 for the vaccuum disconnect front axle.
You can also crawl under and look for the tag on the case itself. I can't remember exactly where it is, but it will tell you the model number and the gear ratio (which will be 2.72:1).
You can also crawl under and look for the tag on the case itself. I can't remember exactly where it is, but it will tell you the model number and the gear ratio (which will be 2.72:1).
- Location
- Maurertown,Va.
Either a 231(part time) or a 242 (full time). The shift pattern is different between the two but,I,m not sure of the name of the 4 wd full time.
A tag on the case itself will tell everything.
Wayne
A tag on the case itself will tell everything.
Wayne
XJMark
NAXJA Forum User
- Location
- New Port Richey, FL.
Here's a picture of the ID tag and it's location. It's the round silver plate with red markings that look like gear teeth.
Mark
Mark
XJMark
NAXJA Forum User
- Location
- New Port Richey, FL.
Part time (NP231) is Command-Trac. Full time (NP242) is Selec-Trac.
