Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
The pins that come on the springs actually have a spacer on them. To install the shims drill the shim out a tick, then remove your center pin. Then remove the thick washer/spacer from the pin. Stick the pin through the shim and then through the leaf pack.
Also....the RE centerpin head are a tad larger (9/16" vs 1/2") than the stock hole in spring pad. A couple of swipes with a Dremel tool in the hole will open it up enough to fit.