- Location
- Billings MT/Rapid City SD
I must be dumb. My shackle upper bushings are shot and I need replacements. However I cannot find anything anywhere. They have a part # stamped on them MO2400. Google is failing me, where can I find these at?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
shackle bushings
- Thread starter Weasel
- Start date
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Who's shackles?
- Location
- Billings MT/Rapid City SD
no idea, bought probably 15 years ago. 
- Location
- Duck River
Could they be Daystar M02400 bushings? I’m thinking the O may actually be an 0.
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
My looked at some new un-installed IRO shackles, they use a 1-1/2" bushing #M02247.
- Location
- Billings MT/Rapid City SD
Maybe just nothing come up when I looked on Daystar site. Pic of the shackle, the are actually 1.25" OD bore for the shackle.
pic:
they might be Tomken, had their leaves back in the day.
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Those look like my RE shackles.
- Location
- Billings MT/Rapid City SD
I thought that at first as well, but the RE appeared to be welded on 3 sides. Mine are just welded on 2 sides. Obviously things could have changed over the years but the pics that I could find seem to line up. Ordered a set of JKS shackles as I'm not sure I'm going to be able to find a bushing kit. Tomken has one but for $30 bucks. Seems a bit steep.
- Location
- Duck River
I found a reference to a Daystar M02400 bushing here:
https://www.4wd.com/sku/Daystar/standard/6001473.pdf
and here:
https://thmotorsports.com/2011424-daystar-bushing.
Nothing on Daystar’s website though.
https://www.4wd.com/sku/Daystar/standard/6001473.pdf
and here:
https://thmotorsports.com/2011424-daystar-bushing.
Nothing on Daystar’s website though.
- Location
- Minneapolis, MN
Measure the bushing location and go to the Prothane website. They have a numerous universal fit bushings with measurements.
- Location
- Billings MT/Rapid City SD
Cool, thanks! I will have to call them Monday and see. Cheaper than new shackles
I did check their site and couldn't find anything close. Like the RE bushing are 1.5" bore size and mine are 1.25".
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
- Location
- Billings MT/Rapid City SD
They only show 2 that have 1.25" diameter and both are too short. Sleeve length is 1.75" long mine are 2.5" overall width.
- Location
- Billings MT/Rapid City SD
They are Daystar bushing, have a new set and sleeves on the way. Had to call them, I guess they are normally just sold in bulk of 50.