• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

What u-joints for 2000 Cherokee?

blakews2217

NAXJA Forum User
Location
Alton, Illinois
I need to do the u-joints for the axle-shafts. Would the 1310s for the ds work there or is it a different joint? I'm ordering off rockauto and also doing ds joints, both axle joints, a track bar and a tail light because of my brother. ( long story ) if it is diffrent what's the cheap one? I don't mind coming back in to grease them or replace them if they go bad I'm just broke and it needs them. I have so much slop in one it scares me to drive quick. Thanks in advance
-Blake


Sent from my iPhone using Tapatalk
 
No the 1310's won't work. The shaft joints are 297/760's!
 
I got greasable universals from napa because they are stronger than the generic closed ones that most Xjs are running. They have held up well and dont need to be greased too often.
 
Back
Top