-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
WTB AX-15
- Thread starter nightfoam
- Start date
A TJ AX-15 with the flatter clocking fit in my '95 just fine, when the stock 231 was behind it. I ran into clearance issues when we swapped in a 241OR, that required energetic massaging the floor with a BFH.
Do note that I running the Novak cable shifter for the t-case, so I don't know if there would be an issue with the standard linkage.
David Bricker / SYR
Do note that I running the Novak cable shifter for the t-case, so I don't know if there would be an issue with the standard linkage.
David Bricker / SYR
- Location
- Sandy,Oregon
It's easy to swap from Wrangler to MJ/XJ clocking,you just have to redrill for the clocking that you want.
The transmissions come set up for either clocking they just don't drill the other set of holes.
I just use a simple template that i made to mark the holes.
The transmissions come set up for either clocking they just don't drill the other set of holes.
I just use a simple template that i made to mark the holes.
