• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

High speed only heater fan

Truckedup

NAXJA Forum User
Location
Western NY state
99 XJ with air....Only works on high speed. Must be a resistor device? And where is the device located?
 
99 XJ with air....Only works on high speed. Must be a resistor device? And where is the device located?

The resistor block is located on the rear lower side of the HVAC Unit.

The kick panel under the glove box has to be removed to get at it. Roll down the glove box to get at the upper screws on the kick panel.

jpgEXJ_2441ResistorKickPanelRR.jpg


The resistor block is located by the Recirc Door actuator.

jpgRecircAirDoor-1.jpg


IMG_4336_zps61c9ae68.jpg


On more than one occasion, the thermal fuse in the resistor block has melted due to high temperatures in the air chamber or high current draw from the blower.

Schematic of the blower circuit, showing the thermal fuse in the resistor block.

%20Blower%20Rev%201.jpg


.
 
Thanks for the info, easy job....Mr mouse was living in there and used the resistor for his urinal....My wife did say the AC smelled like piss...
 
Back
Top