randomguy310
NAXJA Forum User
- Location
- kentucky
I just picked up a 98 grand Cherokee for 100 buck for parts, it has cv axels in the front, what is better to use cv or u joints
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
what better, cv joint front end or u joint
- Thread starter randomguy310
- Start date
- Location
- Seattle, WA
U-joints are stronger and last longer.
- Location
- WA state
What I would do, find late model XJ front shafts, swap in Spicer 760x joints. Swap those into your axle with new unit bearings. And keep your stockers/old unit bearings as spares.
randomguy310
NAXJA Forum User
- Location
- kentucky
I don't need them but was just asking what was better for just a dd nothing really offroad but when it snows..
- Location
- NE Texas
RCV's..
/End
/End
- Location
- Minneapolis, MN
CV axles are a little smoother in operation, but do not last as long. U-joints are stronger and last longer. RCV would be excessive overkill.
randomguy310
NAXJA Forum User
- Location
- kentucky
when you say not last along, what does that mean time wise, I just curious.. cuz if the boot is good and no load on them , not sure why they would wear.
- Location
- Seattle, WA
Because it seems like the boots always tear which leads to quick failure if not fixed.
