PDA

View Full Version : Crap in my way


NW-ZJ-SCOTT
November 6th, 2014, 21:58
Nitro 27spline dana 30 alloy shafts, this consists of a brand new short side inner, a good condition stub shaft, a broken long side inner, and a slightly twisted spline stub shaft.. Nitro has a NO QUESTIONS ASKED warranty You take the time (I don't have) to call them up, and save yourself some cash off of new

$200 for all 4 pieces

15x8 D window Steel wheel (5x4.5BP) shiny black (new wheel?) $30

Lebaron hood vents $50

Piaa 7" h4 fog lights, Hi/low function $100

Boston acoustics 6x9 and 5.25 speakers $100 for all 4

JL audio 5.25" speakers $30

Sony 6x9 4 way speakers $20

700w 2ch amp.. Off brand $20

17" JK Rubicon wheels (5) $100

Ford HP44 (cast wedges) minus brakes/hubs $100

8lug dana 60 rear, no other info $50

Johnnie Walker
November 6th, 2014, 22:38
D30 shafts are tempting. So, they do not need proof of purchase or anything?

NW-ZJ-SCOTT
November 6th, 2014, 22:44
D30 shafts are tempting. So, they do not need proof of purchase or anything?

Nope, these were actually Won at the 2011 Naxja Northerst chapter "NWFest"

I warrantied the short shaft with zero troubles., I did have to ship them the old one first fwiw

Demonoid369
November 6th, 2014, 22:47
Isn't the hp44 you were just cutting up?

NW-ZJ-SCOTT
November 6th, 2014, 23:47
Isn't the hp44 you were just cutting up?
Are you refferring to the HP60 I have been torching the factory mounts off of?

The HP44 has not been touched

Demonoid369
November 7th, 2014, 00:06
Whoops lol haha ya that one, my bad lol

Bronzewyrm
November 7th, 2014, 07:55
I believe those shafts will work with the ARB in the front of the MJ? if so im interested.

Bronze.

Gusto7873
November 7th, 2014, 11:16
pm sent

NW-ZJ-SCOTT
November 7th, 2014, 11:33
I believe those shafts will work with the ARB in the front of the MJ? if so im interested.

Bronze.
if its a stock width Dana 30, with 27 spline ARB, and 27 spline Unibearing.. Should slap right in

Demonoid369
November 7th, 2014, 13:31
if its a stock width Dana 30, with 27 spline ARB, and 27 spline Unibearing.. Should slap right in

He's also got the locking hub conversion though, so the axle shaft would work but I don't think the stub shafts will

Bronzewyrm
November 7th, 2014, 15:29
He's also got the locking hub conversion though, so the axle shaft would work but I don't think the stub shafts will

yeah I forgot about that, and im too lazy to look into it ATM. If they sell Scott they sell. Ill get back to you when I can.


Bronze.

stang65
November 8th, 2014, 14:24
hp44 was 3.5 ratio correct?

BoringDave
November 11th, 2014, 18:30
Ill take that D window black wheel,But can't pick up until this weekend.

NW-ZJ-SCOTT
November 11th, 2014, 19:19
MoJoJoJoJoJo bought the wheel

BoringDave
November 11th, 2014, 19:46
CRAP!