What should the toe be on a lifted XJ

Have been wondering for some time just what I should have my toe set at and saw several thread today that mentioned that lifted XJ's need more toe than stock, but no angles or dimensions and tire diameters given. When I was chasing DW I was told that toe out might help, but again no numbers.

So what are you all running for toe?
Give the angle or dimension (in/out) the tire diamter and lift.

John

scroll down to the alignment write up: My is set at about 1/8" in with 31" tires. http://www.go.jeep-xj.info/index.htm

I run 1/8 to 1/4 inch.

Keeping in mind that 1/4 inch on a 35-37 inch tire would be like 1/8 or less on a stock size tire.

I've always run as little as I can measurably get, and still actually be toed-in. This usually ends up being right about 1/8”.

I always shoot for 1/8". That way when I bend my tie rod it will be perfect at around 1/4".

Thanks for the replies and the useful information.

John