90' Bendix 9 swap to WJ / Prop Valve

Hello guy's.

First, I'm French and I'm not using a translator, so, Sorry if my english is bad.

I Have a Cherokee made in 1990, and I have the disgusting Bendix 9, with the electrical pump...

So I decided to follow some thread about the swap with WJ brake system.

But I have a problem with my prop valve.

I keep the stock prop. valve, but I dont know where is the good output for front left / right and output for rear brakes.

Originally, the prop valve has only one output used to go to the bendix 9 ABS system.









Hope you could help me !

Thank you from france

inputs 1&2 are the same as brake master cyl. front to front/ rear to rear.

outputs A&B are front left and right-- don't think it would matter which is which.

output C is for rear brakes.

Thank you for your fast answer !!!

:yelclaparty1:

pas de probleme.

Hello guys, just to give You some news of my ex-bendix 9.

I put the rear Line of the master cylinder on the fort of the prop valve
And put the front line from the MC to te rear of Prop valve.

Is it bad ? Dangerous ?

The brakes works GOOD, its really powerfull now !!

Thank You from France