• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Transfer Case Shift Linkage

S

sserafin

NAXJA Forum User
Location
Lakewood CO
When manually shifting the transfer case underneath the jeep (np231) when the shift arm is as far back as possible (towards the rear) what gear should that be?
 
Hypoid said:
From underneath the heep?
Click to expand...

Yes. From what I recall, the linkage is designed in such a way that when the handle inside the Jeep is pushed forward, the lever on the tcase is also pushed forward. When the handle inside is pulled back, the lever on the tcase goes to the rear.
 
Moving the range lever on the T-Case itself, forward/up is 2wd and rearward/down is 4-low.
 
So I guess I have a problem, all the way down is 4hi and up one click is 2wd... I did sye before this happened so I am guessing I misaligned something in there.

Ss
 
You must log in or register to reply here.

Similar threads

J
AW4 Problem shifting first to second when hot
Replies
2
Views
1K
cruiser54
C
M
4X4 grinding from 4H to 2H
Replies
6
Views
2K
techno1154
techno1154
E
Transfer case?
Replies
6
Views
628
RCP Phx
R
4
Timing gear?
Replies
3
Views
100
4x4JeePmaNthINg
4
T
Quick question on transfer case lever
Replies
6
Views
1K
truckeejeeper
T
Back
Top