RockTracXJ
NAXJA Forum User
- Location
- Colorado Springs
Any idea on what bushing brand this is? I put in some omix-Ada bushings, but they are junk. I checked out some moogs and they looked ok, but I'm hoping to find what brand this is.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Leaf spring bushing brand?
- Thread starter RockTracXJ
- Start date
hubs97xj
NAXJA Forum User
- Location
- Fort Wayne, IN
souske
NAXJA Forum User
- Location
- The land of competition
Heard good things about stengelbros.
RockTracXJ
NAXJA Forum User
- Location
- Colorado Springs
RockTracXJ
NAXJA Forum User
- Location
- Colorado Springs
Stengelbros has the same part number and dimensions as Capemi.
souske
NAXJA Forum User
- Location
- The land of competition
Might be their supplier for that size
my understanding is they are a distributor rather than a mfr.
my understanding is they are a distributor rather than a mfr.
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
Make sure that you DON'T tighten the leaf spring bolts until you have the vehicle putting all of its weight on the springs. Failure to this will cause premature failure of the bushings.
RockTracXJ
NAXJA Forum User
- Location
- Colorado Springs
Why would that matter?
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
You "pinch" things in at the wrong position and then put it under stress--formula for premature wearing.
