• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Front sway bar diameter

W

wolf2600

NAXJA Forum User
Location
Austin, TX
Just bought a 99 Sport.

Used a dial caliper to measure the front sway bar, and I got 26mm.

Is this a standard size? It seems the only diameters Quadratec sells bushings for are 23, 24, 25, and 28. Is it actually a 25mm?

The bar is clean and I measured in a bunch of locations, but always get 26mm.
 
I just went to autozone and bought the 1" poly bushings. Work great. Snug Fit too.
 
souske said:
Not a bad idea to use a little grease on the poly bushings before install
Click to expand...

Kingkong0192 said:
X2 to this.

I sprayed the swaybar and the bushing pretty liberally with white lithium grease when i changed mine.

I'd highly recommend white lithium grease for lubricating bushings.
Click to expand...
I picked up a pair of the 1" (25.4mm) brackets from Autozone with the built-in zerk fittings.

On my previous XJs, even when I used grease before installing, they'd squeak. Hopefully the greaseable ones won't do that also.
 
You must log in or register to reply here.

Similar threads

C
Sway bar
2
Replies
21
Views
4K
maxbraketorque
M
W
Build thread: daily driven tow rig
4 5 6
Replies
117
Views
10K
Woodswanderer
W
K
Upper sway bar bushings nearly touch coil springs?
Replies
6
Views
1K
klarue
K
J
Shock Recommendations
2
Replies
31
Views
5K
maxbraketorque
M
K
Want a soft riding XJ
2
Replies
21
Views
3K
maxbraketorque
M
Back
Top