• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Question about what degree shims to use.

1975Ironhead

NAXJA Forum User
Location
Erin, Tennessee
I am getting ready to do an S10 bastard pack on the rear of my '00 XJ, and was wondering what degree shims that I should use. I have 4.5" lift on the front, and have already done a 3/4" transfer case drop. I was also wondering what the best fix was for the broken rear upper shock bolts? Thank you.
 
You are not going to know until you get you pack dialed in. What length shaclkes, etc.
If you are planning for the rear to match the front, be aware you will likely need an SYE.

For the broken rear shock mounts, punch the wlednuts free, and fish some new bolts in from the top.
 
Back
Top