toyotawrench
NAXJA Forum User
- Location
- anaheim ca
Regulator either adj or fixed to more then 90psi they would let me borrow until after the koh race?? Thanks in advance.
Ted.
Ted.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
anyone have a co2
- Thread starter toyotawrench
- Start date
- Location
- Torrance, CA
Yes.
You'll need to swing by a gas supply house and get a gasket though, I only have one right now and it's on my primary regulator.
You'll need to swing by a gas supply house and get a gasket though, I only have one right now and it's on my primary regulator.
toyotawrench
NAXJA Forum User
- Location
- anaheim ca
Sweet will you be working @cals this weekend?
jeeperjohn
NAXJA Forum User
- Location
- Temecula, CA
I have one you can borrow but it is empty. You would need to get it filled.
toyotawrench
NAXJA Forum User
- Location
- anaheim ca
thanks john I have the tank, its just that my reg is a fixed 90psi. My air tools don't like have anypower @ 90 psi
jeeperjohn
NAXJA Forum User
- Location
- Temecula, CA
OIC, my regulator is probably the same one then.
2stix
NAXJA Forum User
- Location
- fallbrook Ca.
oil them. most air tools are rated to operate at 90psi. see if that works. but i have to admit, i too crank up the air to a good 120+ when using my air tools. they just seem to work better that way.
kayle666
NAXJA Forum User
- Location
- Temecula C.A.
what size tanks you guys running?
- Location
- Torrance, CA
No, I'm stuck in Torrance. Myabe train with Grimmygimp if he's heading there.
toyotawrench
NAXJA Forum User
- Location
- anaheim ca
I don't think he's coming but I will be seeing him in the next few days if you can get ahold of him and drop it there that would be awwwwsome!
toyotawrench
NAXJA Forum User
- Location
- anaheim ca
My tank is a 10 lber so its plenty for one trip.
Vanimal
NAXJA Forum User
- Location
- escondido, ca
i have a brand new one i just got today for my tig welder, if you need one as a last resort (last resort because i'll need it back fairly quick, and i'm in escondido so not close). it's for argon, but should work with co2 i would think.
toyotawrench
NAXJA Forum User
- Location
- anaheim ca
Thanks bro ii think geoff is going to be fastest cloest. Thanks again everyone!
