Start button wiring

AIbandit

NAXJA Forum User

NAXJA Member

Location

Chico, CA

• Aug 16, 2011

• #1

I whipped up this diagram and wanted to make sure it was correct.

Yellow has " I-1" on the wiring diagram what does that mean?

Also "engine coolant temp" Violet is only hot when the key is off?

This is from a 90 4.0 wiring diagram.

 

Last edited: Aug 16, 2011

AIbandit

NAXJA Forum User

NAXJA Member

Location

Chico, CA

• Aug 16, 2011

• #2

 

beakie

NAXJA Forum User

Location

Ontario, Canada

• Aug 16, 2011

• #3

I haven't looked at the gauge wiring to the starter relay, and it may be redundant to use a relay to activate a relay... but you'd want to ensure you use a switch that can handle that load, even if only temporarily.

 

AIbandit

NAXJA Forum User

NAXJA Member

Location

Chico, CA

• Aug 16, 2011

• #4

Anyone know where orange is going from the ignition?

 

wolfpackjeeper

NAXJA Forum User

Location

500' and 500KCAS, RAF lakenheath

• Aug 16, 2011

• #5

per your diagram I would assume it goes to crap that does not need to be on during start.

 

AIbandit

NAXJA Forum User

NAXJA Member

Location

Chico, CA

• Aug 16, 2011

• #6

wolfpackjeeper said:

per your diagram I would assume it goes to crap that does not need to be on during start.

Click to expand...

Lol that's my assumption based on the ignition diagram.

The colors correspond with the actual stock ignition wires.

PS: I did this diagram based off of the Alldata ignition diagram for someone else or I'd trace it myself

 

Last edited: Aug 16, 2011