ovr the knucle steering conversion

what manufactures out there have the shorter track bar and axle relocation bracket for doing the over the knuckle steering conversion. so far i have found Rusty's has a complete steering kit . i did find a braked from JKS on a parts web site.

the JKS bracket is a good one, i run it.

clayton has a track bar for it. ruff stuff has has axle side track bar mounts

PM Sent

Also, you can PM JeeperJohn. He does awesome work as well.

RoyalXJ said:

clayton has a track bar for it. ruff stuff has has axle side track bar mounts

Click to expand...

They also have a track bar kit as well.

thanks i,ll check it out

I used a poly performance double shear mount and brace at the frame, and a jks WJ track bar. To shorten it up, I had to cut about 3/4" off the threaded end, and I replaced the bushing with a johnny joint with the same threads. I used a jcr bracket on the axle. The jcr bracket needed some grinder work before I was happy with the way it sat on the axle tube.
I did lose some uptravel to the combination of the flipped tie rod, and the track bar mount being 1" lower.