• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Stumped on a lift question/problem.

Fixn2xlr8

NAXJA Forum User
Location
Earf
Background.

1991 laredo.

Rustys 3" lift. (4" front and rear all said and done.)

Rough Country fixed lower CAs. 16.25" from hole to hole.

Stock uppers CAs.

Caster is at 7.8%



My sway disconnect on the pass side is crammed up against the track bar bracket.

Whad I do wrong? Abough the only thing that comes to mind as a fix is adjustable uppers and run them back to 14.5".

Help? Please?


2011-05-31_19-36-42_340.jpg




2011-05-31_19-36-56_833.jpg
 
Looks like the sway bar pins are to long,buy some flush ones!
 
The whole disconnect is crammed up on the track bar bracket. Pull the pin, and 3 gorillas 2 ninjas and a hillbilly might be able to break it loose.

I am well aware of the problem. Just trying to se how I might fix it.


First off. With a 4" lift are 16.25" length lower CAs too much?
 
Heat up the axle mount and bend it towards the tire. This is what i had to do with mine.
 
Back
Top