tie rod length bolt to bolt

I recently put on a new steering set up at stock length and forgot to measure before I started taking apart the old one.

Does anyone know, or can anyone run outside and measure the length from middle of bolt to middle of bolt on the tie rod?

I searched and found a measurement of 52.5" and that is too long because both of my front tires are sticking out to the sides on both sides.

Thank you

You will need to set tow anyway.. front of inside tires should be approx 1/8-3/16" in from the rear of the tires. I have a stock draglink and aftermarket HD tie rod. center (drive side knuckle) to center (at drag link) is approx 42"
IF you have the crossover/y-link type your measurement will be different. If you have something like the Currie currectlync, which is similar to stock, should be close.