gimike812
NAXJA Forum User
- Location
- Tucson, AZ
Dodge 73-74 HP D44 Complete axle with 3.55 gears, open diff. 5 on 4.5 bolt pattern, front disc breaks, manual hubs. Plus an extra set or shafts. $300
Dodge 75-79 D44 5 on 5.5 Bolt pattern Outters, the knuckles out to the manual hubs. Every thing you need to convert your Chevy or ford D44 to 5 on 5.5bp. $150
Front D44 3.55 gears and open carrier. $25
Front D44 4.10 Gears with open carrier and D60 4.11 gears and Limited Slip Carrier. $100 for the set will not split.
8.25 Brand new in the box Track lok 29 splin LSD with Master install kit. $200
8.25 Complete 29spline axle minus one axle shaft needs re-assebly 3.55s lincon locked. $50
1 33x12.50x15 General Grabber ST Never been on the road was a spare still has the nipples. Mounted on white D window steel wheel. 15x10 4"BS 6 on 5.5BP $75
1 33x12.50x15 BFG MT KM1. Approx 6/32s tread depth left new was 19/32. So still good for a full size spare. Mounted on white D window steel wheel. 15x10 4"BS 5 on 5.5BP $50
4 33x12.50x15 BFG MT KM1. Rubber is for rollers or mach-up only not for road use. Mounted on 3 white 1 black D window steel wheel All of them could use paint. 15x10 4"BS 5 on 4.5BP $100
Dodge 360ci complete engine about 40k Miles on a rebuild was bored 20 over and RV cam installed. Cast Iron 4bbl Manifold and Edelbrock 4bbl Carb. Mopar electronic distributor. $500
Dodge Granny gear 4speed NP-435 (with clutch, flywheel, bell housing to SBMopar, linkage and petals,) Attached to NP-203 T-case. $250
Hypertech Power Module(chip), t-stat, Under-drive Pullies and belts, for Ford Bronco, F150, or F250 with 351 5.8L and auto tranny. Everything new well over $450 asking $150.
Willing to trade for
Ford 8.8 with 3.55s and LSD.
Spare 8.8 axle shafts.
Mustang T5 trans from v8 car.
Winch
Cab over camper
AR-15, Complete or parts. M1 carbine, AK-47 or Full size Semi-auto Pistol. 5.56 ammo.
PM me with your phone number and I will text you picts if needed. I am in phoenix from time to time so may be able to work out delivery.
Dodge 75-79 D44 5 on 5.5 Bolt pattern Outters, the knuckles out to the manual hubs. Every thing you need to convert your Chevy or ford D44 to 5 on 5.5bp. $150
Front D44 3.55 gears and open carrier. $25
Front D44 4.10 Gears with open carrier and D60 4.11 gears and Limited Slip Carrier. $100 for the set will not split.
8.25 Brand new in the box Track lok 29 splin LSD with Master install kit. $200
8.25 Complete 29spline axle minus one axle shaft needs re-assebly 3.55s lincon locked. $50
1 33x12.50x15 General Grabber ST Never been on the road was a spare still has the nipples. Mounted on white D window steel wheel. 15x10 4"BS 6 on 5.5BP $75
1 33x12.50x15 BFG MT KM1. Approx 6/32s tread depth left new was 19/32. So still good for a full size spare. Mounted on white D window steel wheel. 15x10 4"BS 5 on 5.5BP $50
4 33x12.50x15 BFG MT KM1. Rubber is for rollers or mach-up only not for road use. Mounted on 3 white 1 black D window steel wheel All of them could use paint. 15x10 4"BS 5 on 4.5BP $100
Dodge 360ci complete engine about 40k Miles on a rebuild was bored 20 over and RV cam installed. Cast Iron 4bbl Manifold and Edelbrock 4bbl Carb. Mopar electronic distributor. $500
Dodge Granny gear 4speed NP-435 (with clutch, flywheel, bell housing to SBMopar, linkage and petals,) Attached to NP-203 T-case. $250
Hypertech Power Module(chip), t-stat, Under-drive Pullies and belts, for Ford Bronco, F150, or F250 with 351 5.8L and auto tranny. Everything new well over $450 asking $150.
Willing to trade for
Ford 8.8 with 3.55s and LSD.
Spare 8.8 axle shafts.
Mustang T5 trans from v8 car.
Winch
Cab over camper
AR-15, Complete or parts. M1 carbine, AK-47 or Full size Semi-auto Pistol. 5.56 ammo.
PM me with your phone number and I will text you picts if needed. I am in phoenix from time to time so may be able to work out delivery.
