Turn signal problem

C

chrisVH

NAXJA Forum User

Location

nj

• Apr 18, 2011

• #1

My hazards work but my turn signals dont. I replaced the relay and replaced the arm on the column and still the same. Any ideas what could possibly be the problem?:banghead:
Thanks

 

matus2

NAXJA Forum User

Location

Phoenix, AZ

• Apr 19, 2011

• #2

Blinker fluid...

 

C

chrisVH

NAXJA Forum User

Location

nj

• Apr 19, 2011

• #3

Checked it already. Im good on that.

 

Begster

NAXJA Forum User

Location

Cape Cod/Boston, Mass

• Apr 19, 2011

• #4

It helps if you say the year of your jeep...

Have you checked the turn signal switch in the steering column?

 

Y

yossarian19

NAXJA Forum User

Location

Grass Valley, CA

• Apr 19, 2011

• #5

Well, I'm going to guess it is wiring between the column stick and the relay.
Also:
what year?

 

C

chrisVH

NAXJA Forum User

Location

nj

• Apr 19, 2011

• #6

Sorry it is a 96 xj. I replaced the turn signal switch twice now and still nothing.

 

Y

yossarian19

NAXJA Forum User

Location

Grass Valley, CA

• Apr 19, 2011

• #7

Yep, you need to check every inch of wire between the switch and the relay. If the switch is good and the relay is good and the bulbs work... that leaves broken wires as the cause.