Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Can somebody steer me to the link with the info for a homemade Renix TPS adapter to a HO. I did the search but couldn't find it. I don't really want to send Hesco $150 for a $10 part. Thanks.
Here's a guide for adapting an HO Throttle body to a Renix intake part of it talks about the TPS. http://www.rockmodified.com/Tech/TB/tb_perf.htm The way I did mine is I picked up a newer style TPS from the wrecking yard removed the end from it and attached to the older TPS. Then I made an adapter plate so I could bolt it on and still have adjustment.
It's possible he's swapping an HO into Renix. He didn't say. Even so, you can swap the Renix intake and exhaust on to the HO using the Renix gasket without a problem.
Here's a guide for adapting an HO Throttle body to a Renix intake part of it talks about the TPS. http://www.rockmodified.com/Tech/TB/tb_perf.htm The way I did mine is I picked up a newer style TPS from the wrecking yard removed the end from it and attached to the older TPS. Then I made an adapter plate so I could bolt it on and still have adjustment.
yeah it looks like it would be...for a one timer-non-cnc operator,BUT,if you were a machineshop owner/operator..then it would be SOOO easy and if I were to be that type person,I would only charge 1/2 of what He$co charges for it-rediculous really...:rattle: