AW4 line quick connect at the AW4

Anyone know if the fuel line QC, GM, on the XJ is the same part for the QC on the transmission at the transmission?


http://www.autozone.com/autozone/ac...25gi?itemIdentifier=429541&_requestid=1963605

Also is the Transmision line 5/16 or 3/8"

it's 3/8". I don't know if it's the same, but Dorman 800-714 fittings are what you want and they are like 7 bucks each at rockauto.

Honestly quick disconnects are the devil and those lines are routed horribly if you wheel it at all, I replaced mine with 3/8" oil cooler hose running from the radiator down the inside driver fender wall, along the firewall, down the rear pass side of the motor, then spliced into the steel lines. When I install my tranny fluid pressure/temp senders I'm going to eliminate the rest of the steel lines and disconnects most likely.

That is the other half of the QC, not the half I need, and that looks like the newer one. Mine is the 87-90 version that I need.