oblivion_twister
NAXJA Forum User
- Location
- Rio Rancho NM
what size socket am I going to need to change the upper control arms?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
UCA bolts/nuts
- Thread starter oblivion_twister
- Start date
oblivion_twister
NAXJA Forum User
- Location
- Rio Rancho NM
21mm, don't need luck. It's not gonna be a problem.
- Location
- Rainy side of Washington
uppers are gonna be 15mm, lowers are 21mm...
uppers are a pain in the butt with a socket like Rob said, I suggest a ratcheting box wrench.
uppers are a pain in the butt with a socket like Rob said, I suggest a ratcheting box wrench.
oblivion_twister
NAXJA Forum User
- Location
- Rio Rancho NM
took them right out and back in no problem.
