-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Easiest way to tell that my front ARB is actually engaging?
- Thread starter 90Pioneer
- Start date
mcantar18c
NAXJA Forum User
- Location
- Fayettnam
Ask your spotter if both tires are turning.
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
big mud hole + stuck + throttle = solution
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Front digs :greensmok
jeeperguy21
NAXJA Forum User
- Location
- Syracuse, UT
Put jack stands under the front axle so the tires are off the ground. Make sure you're not in 4wd. Before it's engaged, spin one of the front tires by hand and see how the tires behave. Then engage the locker, spin the tire again by hand and hopefully you'll see something different.
XJensen
NAXJA Forum User
- Location
- Sacramento
jack it up turn one wheel. If not engaged and therefor open the other tire will spin the opposite way. Engage the locker and they will spin the same direction.
josh
josh
ECKSJAY
Water is dirty
- Location
- Covington, WA
Ask it.
el_roy1985
NAXJA Forum User
- Location
- Bismarck, ND
Engage it and try to turn really sharp. Should be noticeably more difficult then if it was not engaged. Should probably do this on dirt too.
bwinter1946
NAXJA Forum User
- Location
- Madera, California
When mine is engaged it is very difficult to get the front to turn a corner. This is on a gravel driveway. Even in the sand I can tell a big difference. I run the front open unless I need it and even then I prefer not to turn.
dragthatsht
NAXJA Forum User
- Location
- A
Engage it in two wheel drive. Jack up one tire see if it will spin.