oblivion_twister
NAXJA Forum User
- Location
- Rio Rancho NM
What part do I need to connect the flange from a hack n tap to the front ujoint of a stock front ds? Or does the hack n tap come with the needed part?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Hack n tap to front prop question
- Thread starter oblivion_twister
- Start date
- Location
- Seattle, WA
You need Spicer flange part number 211229x. The cheapest I could find it here: http://www.alljeep.com/oscommerce/a....php?keywords=211229x&search_in_description=1
oblivion_twister
NAXJA Forum User
- Location
- Rio Rancho NM
that looks like the part for the tc side, I'm wondering what goes onto the u joint to attach it to the flange from the hack n tap
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
He already called it,that is the correct part number for the flange style SYE.
92xjunk
NAXJA Forum User
- Location
- sedro woolley, WA
Just order the iron rock off road hack and tap it comes with a yoke instead of a flange and its only about $120
- Location
- Seattle, WA
This is the part that you attach to the driveshaft. This flange mounts to the TCase flange. Trust me - I run this on my NP242.