Iron Rock Off Road Crossmember Issues

C

classic96xj

NAXJA Forum User

Location

Harrison, TN

• Oct 1, 2010

• #1

im putting on my iro longarms and got the crossmember mounted up and the trans mount lowered onto it and now my front ds double cardone and the transfer case yoke are hitting the edge of the crossmember and not allowing the ds to fully turn without getting caught. anybody else had this issue or know any solutions? thanks

 

S

sfxjdent

NAXJA Forum User

Location

Arizona

• Oct 1, 2010

• #2

i just checked mine and there is about 2 inches of clearance cicumfrentially around the double cardon. I'd give IRO a call, they have always been very helpfull every time I've called them.

 

CaliXJ

NAXJA Forum User

Location

Oceanside, CA

• Oct 1, 2010

• #3

Check your trans mount. I had the same problem with the RC longarm cross member. Put in new mount, problem solved.

 

soopergoober

NAXJA Forum User

Location

San Marcos, CA

• Oct 1, 2010

• #4

CaliXJ said:

Check your trans mount.

Click to expand...

x2

Also, what transmission/transfercase do you have?

 

C

classic96xj

NAXJA Forum User

Location

Harrison, TN

• Oct 1, 2010

• #5

Thanks. Ill definately check that. And I have a aw4 and 231

 

A

AshyLarry

NAXJA Forum User

Location

Brownsburg, IN

• Oct 1, 2010

• #6

I am pretty sure I had the same problem. Called IRO and they suggested a trans bushings, but mine was still good. I took a grinder to the xmember brace.