keith_b00ne
NAXJA Forum User
- Location
- Kentuckiana
When I go wheeling my ARB bumper drags and limits me every time I try a steep climb. Anyone modify the ARB bumper to get better approach angles? Should I just sell it?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
ARB Bumper Modification
- Thread starter keith_b00ne
- Start date
robsjeepxj
NAXJA Forum User
- Location
- North Jersey
Anything can be modified 
I like the protection the ARB bumper gives me up front and also the winch mounted inside the bumper is nice too.
I like the protection the ARB bumper gives me up front and also the winch mounted inside the bumper is nice too.keith_b00ne
NAXJA Forum User
- Location
- Kentuckiana
Hard to work on the winch if something goes wrong. I like that I can tie in the ARB to my future exo cage.
stroked88
NAXJA Forum User
- Location
- Carlsbad NM
but if you have the capability to build an exo cage shouldnt you be able to tie in just about any bumper to it?
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
This was what I did with mine. I did this quite some time ago, and just haven't finished it.
I cut the old, bent mounts off. (elongated holes courtesy of previous owner)
New, stronger mounts made from 1/4" (pre d-shackle mounts being welded on)
My plan was to recess lights into the bumper, have d-ring mounts come through the face, and then reweld the bottom and add internal bracing with with 1/4".
I cut the old, bent mounts off. (elongated holes courtesy of previous owner)
New, stronger mounts made from 1/4" (pre d-shackle mounts being welded on)
My plan was to recess lights into the bumper, have d-ring mounts come through the face, and then reweld the bottom and add internal bracing with with 1/4".
keith_b00ne
NAXJA Forum User
- Location
- Kentuckiana
I like those recessed lights.