90 Wagoneer Limited - There is a large vacuum harness on the front of the engine, kind of beside the airbox. What exactly does it do, and is there a way to get rid of it. Would really like to clean up the engine bay a little bit. Looks like one of the lines runs to a sensor on the fender, but then it loops back into the harness on the engine. Anysuggestions on removal? Thanks.....
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Vacuum lines
- Thread starter boonie
- Start date
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
You need it--EGR valve, EGR solenoid/EVAP Purge, transducer vacuum valve, CCV system, MAP, thermostatic valve in the air box, and the charcoal canister.
So, no, you can't get rid of it.
It is a two-piece harness, and if you need to replace it they run about $23.99 each piece at NAPA. You could BUILD your own harness out of vacuum hose/tubing, as some have done.
So, no, you can't get rid of it.
It is a two-piece harness, and if you need to replace it they run about $23.99 each piece at NAPA. You could BUILD your own harness out of vacuum hose/tubing, as some have done.