2001 xj how to make custom steering?

Ok so I have a 2001 XJ with 6" lift rough country long arm and stock front d30. I need a steering kit and a new track bar, my rough country track bar bent and now the axle is shifted. the steering is currently stock and at the limit. It is my trail jeep only. I dont have the sway bar and don't mind trimming the coil buckets. I like the ballistic fab kit but was wondering if I just bought the dom tubing and rod ends, I could also just make my own track bar the same way. I need to move the track bar axle mount right? How and where to buy the mount? Any help/pics would be greatly appreciated!!

http://www.ironrockoffroad.com/Merc...=IROR&Product_Code=IR-STBCK&Category_Code=PFXhttp://www.ironrockoffroad.com/Merc...=IROR&Product_Code=IR-STBCK&Category_Code=PFX

http://bulletproofsteering.com/jeeppricingoptions.html




Matt

Thats it no builder help? Track bar above axle not the stock location!!!

http://store.jksmfg.com/merchant2/m...0_925&Store_Code=JKS01&Category_Code=FABParts
JKS Over the Axle trackbar bracket


I would highly recommend doing the WJ knuckle swap to address your steering issues. You get the best of both worlds, beefy high steer and killer brakes. More info here..... http://www.naxja.org/forum/showthread.php?t=913774&page=9