digital in-dash clock ... plug and play?

B

bhb399mm

NAXJA Forum User

Location

Mammoth Lakes, CA

• Nov 5, 2006

• #1

noticed that there was a taped off wire harness tucked in behind where the digital in-dash clock came from the factory on some models, if i were to acquire one somewhere, would it plug right in?

Brad

 

X

XJING

NAXJA Forum User

Location

Westcoast, Florida

• Nov 5, 2006

• #2

Should be. Mine was. GoJeep I think has a write up on this, but if you get your year xj's clock its plug and play. I think you can get other years and switch the connector. easy mod.

 

8

88XJSport

NAXJA Forum User

Location

Michigan

• Nov 5, 2006

• #3

XJING said:

Should be. Mine was. GoJeep I think has a write up on this, but if you get your year xj's clock its plug and play. I think you can get other years and switch the connector. easy mod.

Click to expand...

X2, check out this go jeep site, like mentioned, it has a wealth of info on the clock. http://www.go.jeep-xj.info/HowtoDashClock.htm

 

C

caspergotaz28

NAXJA Forum User

Location

Southeast, TX

• Nov 5, 2006

• #4

I think there were four different types of plugs used over the years. You might have to cut and crimp.