ChairOhKey
NAXJA Forum User
- Location
- Salem, OR
I made the dumb mistake of pulling out my foglight switch and not noticing which wires went where. Could someone quickly point out which goes where? Thanks a whole lot.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Quick dash switch wiring help!!
- Thread starter ChairOhKey
- Start date
2000XJSPORT
NAXJA Forum User
- Location
- Illinois
Well if it is the factory wires on the harness. 97-01 goes like this.
1 E2 20OR FUSED PANEL LAMPS DIMMER SWITCH SIGNAL
2 L92 20LB FOG LAMP SWITCH OUTPUT
3 L139 20VT FUSED LAMP SWITCH OUTPUT
4 Z1 20BK GROUND
But it looks like you just have an after market one. Where you have the negative and two positives that split on the switch "one coming from the positive terminal and the other to the lights". Not very sure, but I would guess the black connects to the middle and the two reds go on the top and bottom connections. Like I said I can't be 100% sure since it looks like after market wires. Other than that you would have to trace the wire back to be sure.
1 E2 20OR FUSED PANEL LAMPS DIMMER SWITCH SIGNAL
2 L92 20LB FOG LAMP SWITCH OUTPUT
3 L139 20VT FUSED LAMP SWITCH OUTPUT
4 Z1 20BK GROUND
But it looks like you just have an after market one. Where you have the negative and two positives that split on the switch "one coming from the positive terminal and the other to the lights". Not very sure, but I would guess the black connects to the middle and the two reds go on the top and bottom connections. Like I said I can't be 100% sure since it looks like after market wires. Other than that you would have to trace the wire back to be sure.
Similar threads
