• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Taurus fan wiring question

C

chpmnsws6

NAXJA Forum User
Location
Springfield IL
When using the taurus fan, can both the low speed and high speed be powered at the same time? I am unsure how to wire in the high speed while shutting off the low side in the process.

Any ideas? I have 3 of them needing to be installed between the truck, the jeep, and the LS1 miata
 
This what you are talking about?
fancontrolcircuit.jpg

If you want the low speed to run you must run it through the 87a terminal of the relay so it is disabled when the high speed kicks in. I have a more detailed drawing showing two fan speeds. PM me if you want that one.
 
Last edited:
You have 4,834 posts...... Thats a lot of searching! :)

The truck only has a mechanical fan, but has AC (1999 Cummins)

I will be using a switch set at 180 degrees and one set at 207 degrees
 
You must log in or register to reply here.

Similar threads

J
5.3 Swap wiring question
Replies
3
Views
3K
cdsurf
C
L
Fuel Pump Wiring
Replies
5
Views
1K
Lordhelemt
L
Saudade
Speedo Deado
Replies
4
Views
2K
Anak
Anak
F
Actual Measurements of Airflow for Triple Electric Fan Setup
2
Replies
23
Views
4K
75SV1
7
L
Wiring Check for AW4 Brake sense and tcu/pcm
Replies
0
Views
1K
Lordhelemt
L
Back
Top