stephenspann27
NAXJA Forum User
- Location
- College Station, Tx
"Speed Sensor Test
Disconnect speed sensor connector from ignition control
module. Place an ohmmeter between terminals "A" and "B". (Marked on
connector) Reading should be 125-275 ohms with engine hot. Replace
sensor if readings are not within specifications."
Is this referring to the cam shaft position sensor maybe?
Disconnect speed sensor connector from ignition control
module. Place an ohmmeter between terminals "A" and "B". (Marked on
connector) Reading should be 125-275 ohms with engine hot. Replace
sensor if readings are not within specifications."
Is this referring to the cam shaft position sensor maybe?
