• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Aligment specs

junglejuice

NAXJA Forum User
Does anybody have or know where I can get the alignment specs for the Xj? Especially for the right hand drive model????
Mine pulls left (remember that it is righthand drive) so it wants to run off the road into the trees all the time, not bad but there all the time so I would assume that it should be the opposite to the Us models....
Cheers, Junglejuice
 
ALIGNMENT SPECIFICATIONS
WHEEL ALIGNMENT SPECIFICATIONS TABLE
http://jeepgarage.free.fr/ownersmanual.html

Application Specification
Cherokee, Comanche,
Wrangler & Wagoneer
Ride Height in Inches ........................... .....
Adjustment Procedures ........................... .....
Camber in Degrees (Fraction) .............. -1/2 to 1/2
Camber in Degrees (Decimal) ............. -0.50 to 0.50
Caster in Degrees (Fraction) ................... 7 to 8
Caster in Degrees (Decimal) ................ 7.0 to 8.0
Toe-In in Inches (Fraction) .............. 1/32 to 1/32
Toe-In in Inches (Decimal) ............. 0.031 to 0.031
Toe-In in Degrees (Fraction) ............. 1/16 to 1/16
Toe-In in Degrees (Decimal) ............ 0.063 to 0.063
Toe-Out on Turns
Inner .......................................... NS
Outer .......................................... NS

Steering Axis Inclination (SAI) ................ 8 1/2


I've found that on my XJ's with 6" of lift and 33" tall tires, like a little more Toe-in. I've run 1/8" toe-in for several years with even tire wear. I run 6* neg. caster.
 
Last edited:
Back
Top