• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Where does this hose attach?

QuadraTracGuy

NAXJA Forum User
Location
Salem, Oregon
The arrow in the first picture points to the opposite end of the hose and bracket seen hanging down in the second picture. It looks to me like a vent line off of the transfer case. But I can't figure out where the end hanging down goes or where it bolts to.

Thanks for any help.

IMG_02.jpg


IMG_01.jpg
 
Yup, that's a breather hose. IIRC, it should be attached to one of the top bellhousing bolts.
 
Could be worse, i don't have a garage... I can tell you turning a wrench in the freezing cold aint fun. I've done a radiator, axle swap, and a bunch of other crap in the winter with no cover. Also i helped out a friend of mine do an engine swap a bit ago and he was missing THREE bell housing bolts. Don't worry though, we found three halfs stuck in his block haha.
 
Back
Top