• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

How to install Add-a-leafs?

get new UBolts and spring Clamps. Search for a write up. Quick and dirtyis, C-Clamp springs together drop axel down, leaving springs in rig, cut spring clamps realease c-clamps slide the AAl in, re clamp with C-Clamp, re attach axel, install new spring clamps, remove c-clamps, your done.
 
You'll need (or want) new center pins as well - get really long ones or use a piece of steel rod to keep the holes all lined up while you reclamp with the C-clamps (get the 6" really strong ones, not the little ones). Don't use the center pin to clamp, you'll wear on the threads a lot more and it's not as easy. You got OME leafs as I recall, so you can probably just undo the bolts on the leaf clamps rather than cutting them off.
 
Back
Top