What else will I need to do after I lift?

I'm getting an RC 3" lift with full packs soon, and want to know if I should expect any necessary changes afterwards. I know that a TC Drop is a possibility, and front disconnects also. Will I have to change my steering, pitman arm, tierods, or anything like that?

Its a 97 and I'm going to run 31s.

Thanks,
Greg

I ran a 3.5" RE lift with front discos and 31s for a long time. The only thing added was a 1" transfer case drop. Going to 6" of lift & 33s is what takes a lot of changes and extra $$$.
hth, DougN

Besides Shocks, which I am sure you ordered, here are a couple suggestions.

I would wait to see if you need to drop the Transfer Case to see if you have any Rear End Vibration. Usually they are not needed until about 4 to 4.5"s of Lift. You will have better Transfer Case Clearance this way. If you go with a SYE and Driveshaft, you will not need one at all IMHO.

FRONT ADJUSTABLE TRACK BAR, CHEROKEE XJ $159.50
http://www.ironman4x4fab.com/Jeep_XJ_Track_Bars/XJ_FTB.html

RE-RE2500 PITMAN ARM YJ/TJ/XJ POWER STEERING $63.00
http://www.offroadwarehouse.com/products/sfID1/4/sfID2/736/sfID3/749/productID/38827

Hope this helps.