Boostwerks.com
NAXJA Forum User
- Location
- Colorado
We are doing some prototyping, and need to know the thread specs of the factory pitman arm nut.
TIA! :cheers:
Bryson
TIA! :cheers:
Bryson
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Anyone happen to know the thread specs of the factory pitman arm nut?
- Thread starter Boostwerks.com
- Start date
5-90
NAXJA Forum User
- Location
- Hammerspace
It was 7/8"-14 UNC for the longest - I don't know if (or when,) it changed, but I'd probably get nuts in 7/8"-14, M20, and M22 and try them all for fitment.
Original_MudButt
NAXJA Forum User
- Location
- In the eighth dimension
Just happen to have my old steering box next to me here at work.
7/8-14. Checked with micrometer and 60* thread pitch gauge.
7/8-14. Checked with micrometer and 60* thread pitch gauge.
Boostwerks.com
NAXJA Forum User
- Location
- Colorado
Awesome. Thanks guys. 
Original_MudButt
NAXJA Forum User
- Location
- In the eighth dimension
Awesome. Thanks guys.
Okay, now spill.... What's going on in the skunkworks over there?
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Better be a steering box brace
And just to confirm from a third person, it is 7/8-14 fine thread
Boostwerks.com
NAXJA Forum User
- Location
- Colorado
PM's sent. Foxwar71 clean up your inbox!
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
PM's sent. Foxwar71 clean up your inbox!
:eyes: Done.
Damn membership running out on me and losing the perks :doh:
