90exjay
NAXJA Forum User
- Location
- Federal Way, WA.
Tried a search got no answer,anyone know if it will work?
btw its a 90 xj 2 door if that matters.
Thnx Sean
btw its a 90 xj 2 door if that matters.
Thnx Sean
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
04 wrangler d44 fit a 90 xj?
- Thread starter 90exjay
- Start date
90exjay
NAXJA Forum User
- Location
- Federal Way, WA.
Both if possible,but the rear for sure.
- Location
- Westminster, SoCal
front should be a drop in (keep in mind front is LP d44 with d30 outers)90exjay said:
rear you'll have to weld on perches
90exjay
NAXJA Forum User
- Location
- Federal Way, WA.
So for the welding impared it might be difficult.:lol
sintax
NAXJA Forum User
- Location
- Corona, CA
90exjay said:
no, for the welding impared it would be impossible.
unless you used a lot of duct tape
JeffsJeep04
NAXJA Forum User
- Location
- Dublin, GA
No, for the welding impared, you find a friend with a welder. Shouldn't cost more then $50 to get the rear perches welded on.sintax said:
- Location
- Port Orchard, WA
please define "fit"
35's "fit" on a stock XJ
full width axles "fit" in XJ's...
35's "fit" on a stock XJ
full width axles "fit" in XJ's...
90exjay
NAXJA Forum User
- Location
- Federal Way, WA.
Iguess i should have said fit with minor to no mods.
90exjay
NAXJA Forum User
- Location
- Federal Way, WA.
basalt51 said:
Well i found a gentlemen who is willing to part with them for around $800 for both.
Red97XJ
NAXJA Forum User
- Location
- Northern Indiana
are ther rubi axles? If so, get em!
Root Moose
NAXJA Forum User
- Location
- ON, Canada
If not you're paying too much.Red97XJ said:
