• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

To-Do List

MoparManiac

NAXJA Forum User
Location
Amherst, NH
I guess I'll start it again 2nd year in a row.

- Bend up harness bar and X brace for cage, finish weld and paint it (hopefully this weekend)
- Finish building 440
- Get 440 to fit in engine bay :laugh:
- Build motor mounts
- Modify/ build crossmember, transmission mount, NP205 rear mount
- Redo traction bar crossmember mount (move to passenger side)
- Build new driveshafts
- Mount radiator, plumb cooling
- Build exhaust
- New dash and gauges
- Megasquirt and TBI
- Clean up wiring harness

Plenty more I'm missing I'm sure.
 
Swap out proportioning valve to get brakes workin 100%
Hope jeep dosnt fall apart during shake down runs
Cage
Truck/trailer
 
Wait for my caliper brackets to come in so I can finally get my rear axle back together
cage?
Beadlocks?
Redo steering
 
Say f. To building new jeep and run brown jeep utill it is done.
 
well, first on my list is get the time off. we're changing to a new system right around the same time, and they don't want people taking a long weekend nevermind a whole week off... but worst case I'll just call out sick for a few days :D

I need to replace the tires on my trailer and maybe redo its brakes
figure out whats wrong with the ram on the jeep, fix the steering stuff so it works right and doesn't piss everywhere all the time.
replace the jeep's clutch
*not* do a cage :)
 
oh oh i love these. lets start at the beginning.

finish power steering stuff
install bumpstops
install shocks
register and insure it
get wheels and tires
finish the cage/bumpers/etc
get new pass side knuckle+ball joints
route front OX cable
tidy up rear brake lines
trim gas tank skid so the 60 pumpkin doesnt smash it
crossmember+skid

doesnt seem too bad...
 
Last edited:
Shackle reloaction brackets
New SYE
install my chromo shafts
Front and rear unibody stiffeners
HYRDO ASSIST
put a bend in LCAs so tires clearence better
build new flatter belly skid


dont need too much more
 
fix whatever breaks while im wheeling while you guys are still building.
 
Swap out proportioning valve to get brakes workin 100%
Hope jeep dosnt fall apart during shake down runs
Cage
Truck/trailer

Can now add

Need to swap out rear drive shaft

Need hydro assist

Add pickup to the back of fuel cell

Belly pan

Skin rockers
 
gear and lock new axles
swap out the lp30 and 35
get rid of the abs
install longarms
built crossmember and tc skid
setup rear suspension
figure out how im gonna do my rear shocks
mount winch
install tank skid
install the 231 w/ sye

i have almost all the parts just need the time
 
Put some glass in my hatch
get the bolt for my atlas shifter that fell out at rocktober
Gear, lock, rebuild king pins and breaks, and install 60
build steering.
Buy 2 cheap 35" rubbers for 17" rims.

That doesent seem like much. It feels like alot more.
 
Build traction bar
Cage
Rear disks
Lengthen drive shafts
build another frame side trac bar mount
Front anti-rock somehow
 
Last edited:
Fix OBA air leak
Track down some annoying rattles
Tighten bolts, grease joints, maybe paint a few things underneath

And MAYBE, just maybe put a winch on
 
1. Put on tire shine
2. add necessary stickers
3. maybe do a custom pvc snorkel & add some chrome...
 
- DONE Bend up harness bar and X brace for cage, finish weld and paint it (hopefully this weekend)
- Finish building 440
- Get 440 to fit in engine bay :laugh:
- Build motor mounts
- Modify/ build crossmember, transmission mount, NP205 rear mount
- Redo traction bar crossmember mount (move to passenger side)
- Build new driveshafts
- Mount radiator, plumb cooling
- Build exhaust
- New dash and gauges
- Megasquirt and TBI
- Clean up wiring harness
 
plan 1:
- build new frame
- build new axles
- freshen up spare motor (or 5.2?), trans, transfer case, install sye, install on new frame
- build 3 link and attach axles to frame in various ways
- put cab and new bed on new frame, install new floors
- install 97+ interior
- drive

plan 2:
- wait until a week before (alright fine, the day before)
- panic
- booger weld patches across the holes and cracks in my frame
- throw every jeep part I own in the back
- throw every tool I own in the back
- do not remove trash from rocktoberfest, fallcrawl, or any other run from the back, under any circumstances
- throw all the beer and hard alcohol I can find in the back
- throw hammock in the back
- buy food on the way out of town at 2am Saturday
- drive

I am sure what actually happens will fall somewhere between these two plans.
 
Back
Top