NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Other Technical Forums > Jeep Street and Performance
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Jeep Street and Performance Do you like to go fast in your Jeep?

Reply
 
Thread Tools Rate Thread Display Modes
  #31  
Old August 21st, 2017, 19:53
SATURN5 SATURN5 is offline
NAXJA Forum User
 
Join Date: Jun 2017
Location: Ohio
Posts: 4
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

Quote:
Originally Posted by Alexia View Post
I am looking into potentially making this a retail product for people to buy. Something cheaper than aftermarket gauge setups that retains more functionality would be useful to people doing engine swaps.
I'm working on swapping a early 1UZ into a 01. Plans initial are to use both ecms. The early 1UZ computer doesn't have any CAN features that I am aware of. Later on, like to switch to a MS3, Jeep TCU and run the cluster without the Jeep ecm.
Reply With Quote
  #32  
Old September 29th, 2017, 05:55
SATURN5 SATURN5 is offline
NAXJA Forum User
 
Join Date: Jun 2017
Location: Ohio
Posts: 4
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

Went to look at the github link and it's 404... I take you pulled it down?
Reply With Quote
  #33  
Old October 1st, 2017, 21:08
Alexia Alexia is offline
NAXJA Forum User
 
Join Date: Aug 2008
Location: Huntsville, AL
Posts: 734
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

Quote:
Originally Posted by SATURN5 View Post
Went to look at the github link and it's 404... I take you pulled it down?
Basically, yes. Any existing copies are still valid under the GPL v3 license. I have been approached by a couple companies to purchase the rights to it outright. That's not going to happen though and I will be producing my own product from it.(Assuming all goes well in my own personal world.)
Reply With Quote
  #34  
Old October 7th, 2017, 11:41
SATURN5 SATURN5 is offline
NAXJA Forum User
 
Join Date: Jun 2017
Location: Ohio
Posts: 4
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

Good luck!
Reply With Quote
  #35  
Old October 27th, 2017, 13:31
gunselman gunselman is offline
NAXJA Member
 
Join Date: Oct 2008
Location: Indianapolis
Posts: 43
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

Looking forward to this for a LS swap!
Reply With Quote
  #36  
Old October 28th, 2017, 15:12
kastein kastein is offline
NAXJA Forum User
 
Join Date: Jul 2009
Location: Central MA - keep going till the road turns to dirt, then listen for banjos
Posts: 14,006
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

I need to check this forum more often I guess. I have the Chrysler CCD bus standard from SAE, I can't give it away as it is copyrighted but if you have any specific questions I can look through it for you.

This is right up my alley... If you want a custom PCB designed to minimize the number of components involved, let me know, I enjoy working on the kind of stuff. It has always bothered me watching people run two ECUs or gut their stock cluster and fill it with gaudy aftermarket gauges when doing a swap.

I'm actually working on a very similar project for the FSJ world right now since I accidentally bought a J10 to build instead of building the MJ I bought.
Reply With Quote
  #37  
Old October 28th, 2017, 15:44
Alexia Alexia is offline
NAXJA Forum User
 
Join Date: Aug 2008
Location: Huntsville, AL
Posts: 734
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

I have a copy of that particular document as well. Though I found out about it well after I sat down to do all the reverse engineering.(Argh!)

I am moving into a 30x50 shop over the next two weeks and everything is packed away at the moment.
Reply With Quote
  #38  
Old February 9th, 2018, 22:22
B18ccivics B18ccivics is offline
NAXJA Forum User
 
Join Date: Feb 2018
Location: Ky
Posts: 1
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

I am in the process of integrating a haltech 2500 in my Colorado, would you have any information about the 04 Colorado can bus system and address for the cluster?
Reply With Quote
  #39  
Old February 9th, 2018, 22:50
Alexia Alexia is offline
NAXJA Forum User
 
Join Date: Aug 2008
Location: Huntsville, AL
Posts: 734
Re: CAN bus to CCD bus Protocol Translator(Chrysler PCM Simulator)

Quote:
Originally Posted by B18ccivics View Post
I am in the process of integrating a haltech 2500 in my Colorado, would you have any information about the 04 Colorado can bus system and address for the cluster?
As far as I know that uses GM LAN CAN bus. There is plenty of documentation around the internet for that protocol.

I am still working on interfacing GM LAN CAN bus. I have a L99/6L80 swap in my LJ tentatively planned for later this year to help validate anything I do. Right now I have Chrysler SCI bus and Subaru Select Monitor 3 in the queue to be worked on as well.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
o2 simulator ju82takata OEM Tech Discussion 2 January 25th, 2009 07:48
o2 sensor simulator???? 2000xj4x4 OEM Tech Discussion 10 November 28th, 2007 18:30
o2 simulator?? Dirt Modified Tech Discussion 3 November 10th, 2005 12:22


All times are GMT -7. The time now is 20:03.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014