• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Whatcha need to get done before WF18

SAMSET

NAXJA Member
NAXJA Member
Location
Bourbonnais IL.
surprised this didn't get started yet.

i am planning on bring my TJ. picked it up a few months ago and it needed a few thing before i can start wheeling

no power steering. investigate and repair.
no windshield wiper arms or blades. replace.
new plugs, wires, cap, rotor
new battery
seafoam motor
replace some form of exhaust
repair trans shifter
seat belts don't work. investigate and repair.
install roof.

after i get it drive able and roadworthy, start working on tech requirements.
 
Weld in frame stiffeners

Install IRO 3 LINK

Tie in bumper/build new bumper

Regear front axle to 4.10s

Wire up winch

Raise exhaust

Sent from my SM-G955U1 using Tapatalk
 
Need to do list:
1) Buy and mount a full size spare(33x10.50x15)
2) Fill with gas
3) Buy some beer
Like to do list:
1) New battery to support the new winch
2) Two new or rebuilt drive shafts to get rid of vibes between 50-60 MPH
3) Buy some beer
Never gonna happen before WF list:
1) 456:1 gears
2) Buy and install remanufactured motor
3) Buy some beer (that is prolly gonna happen)
 
New front control arms at least. Longarms if I can make it happen. Fix the antenna on my FRS, and just some minor yearly maintaince.
 
My rig:
Finish linking the rear
Build new driveshafts
Full size spare

Buddy’s that I’m helping build:
Driverside boatside
Cage
Steering
Possibly 3 link front
 
bd687f3aaff57364f1666c234194a156.jpg


Finish the install of these.

mac ‘drivers side ready for paint’ gyvr
 
There's always a list to complete

Jeep steering fixed
Jeep oil change
New trailer gone over
Swap new tires and wheels on jeep
Jeep t-case skid
Sleeping arrangements figured out
Truck gone over and ready to tow
Gather spare jeep parts

I'm sure the list will grow as we go along
 
Trans pan gasket
Exhaust donut gasket
Fix kick down cable end clip
Adjust steering
Gusset panhard bracket
Coolant
Exhaust hanger
Fix broken bolt for cross member to unibody
 
Need to do list:
1) Buy and mount a full size spare(33x10.50x15)-ordered
2) Fill with gas
3) Buy some beer-done
Like to do list:
1) New battery to support the new winch
2) Two new or rebuilt drive shafts to get rid of vibes between 50-60 MPH-ordered
3) Buy some beer
Never gonna happen before WF list:
1) 456:1 gears-ordered
2) Buy and install remanufactured motor
3) Buy some beer (that is prolly gonna happen)
 
Back
Top