• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

D44 hd in xj

Blarin.aaron

NAXJA Forum User
Location
Texas
So First off....I just wanna say you guys are awesome! I've been building my jeep for like 2 years and I use info from here all of the time!! So thank you!

Now to the point.....I have a 96 4cylinder 5 speed 2 door 2wd I'm converting...
I bought the axles from a 78 f150 super cab regeared to 5.40s with spools

The 9 inch is already under the back of the jeep....I just ordered the xj/tj combo brackets from ballistic fab....they came with no instructions at all....any info/help I could get putting them on my axle would be amazing!

The axle has 3 inch tubes its 3 inches wider than stock and it has no brackets on it anymore. I need to figure out pinion angle and locate where to put all of my brackets....can you guys help me?
 
Concur.
Do be aware that you might need to do a cut/turn of the inner Cs to get the caster angle and the pinion angle to fit your application.
 
Back
Top