Hi, Arotovegan thanks for keeping up with a year old thread. -- NO to the 2.5L VM; but I should be able to use the same clutch
Chrysler # 4864-835, Do you know the part # you used?
hi Ecomike I have 2 diesel converted xj's The 98 with the 2.2L Kubota/Carrier reefer engine in front of a stock 2wd AX15 that is daily driving for 2 years now . And a '96 with a Normally aspirated Mercedes 617 W/ & AW4.
I think I am maybe compounding my Part# problems and overthinking it a bit. I have a 1994 ax15 transmission and axle. but I run GenII '98 body. It messes me up a bit that there are different part #'s for the clutches from the 94 to the 97+ when I started looking for the diesel clutch. The 1994 Chrysler part # 4773 773 branches off into the aftermarket "LUK" and multiplies from there.
At the end of the day for the US or the UK I want a 10.4" , 1-1/8" 10T spline diesel clutch disc, not a gas clutch disc, and that is easy enough I hope, if you don't count that it has to come from the UK. but in '1994 If you are not careful you can get a AX5 diesel clutch I think?, and I don't really want that.