NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA's Technical Forums > Modified Tech Discussion
Register FAQ Users List Calendar Mark Forums Read
HOME Member FAQ Sponsor Info Rules Donate Bylaws Store Members Chat E-Mail

Modified Tech Discussion Forum for Tech related discussion for Modified XJ's and MJ's.

Reply
 
Thread Tools Display Modes
  #16  
Old August 8th, 2017, 18:18
ehall's Avatar
ehall ehall is offline
NAXJA Member
 
Join Date: Dec 2007
Location: Southern Maryland
Posts: 8,821
Re: Which axles would you use?

I would build the JK Rubi axles if you already have them
__________________
.
my '91 beater rebuild
Reply With Quote
  #17  
Old August 9th, 2017, 18:27
themauler's Avatar
themauler themauler is offline
NAXJA Forum User
 
Join Date: Apr 2010
Location: Va Beach
Posts: 605
Re: Which axles would you use?

I know this is going to start a dumpster fire but why not sell your JK axles buy someone's built 1 ton axles. You are located in WV so you know that you can't crawl everything. I guess you can develop skills not breaking stock jeep axles or picking lines you won't drag diffs on.

That's my thought and your options will be much greater with 8 lugs and only become vulnerable on tires over 40"
Reply With Quote
  #18  
Old August 10th, 2017, 06:11
jonb8's Avatar
jonb8 jonb8 is offline
NAXJA Forum User
 
Join Date: Dec 2007
Location: Elizabeth WV
Posts: 34
Re: Which axles would you use?

Been out of town at coaching classes... Thanks for all the input, WV has state inspection so tons are out of the question, way to wide. JK axles on stock offset wheels and 35 12.50's are 1/4 in narrower then stock xj axles on 4in offset wheels and 35 12.50's. It'll work but I have to stay on stock offset JK wheels...I don't like that. I'm not going over a 35 in tire, if I need to wheel hard I'll take the truggy but I'm trying to get out of the truck and trailer life and go back to driving to the trail...
Reply With Quote
  #19  
Old August 10th, 2017, 11:24
themauler's Avatar
themauler themauler is offline
NAXJA Forum User
 
Join Date: Apr 2010
Location: Va Beach
Posts: 605
Which axles would you use?

Quote:
Originally Posted by jonb8 View Post
Been out of town at coaching classes... Thanks for all the input, WV has state inspection so tons are out of the question, way to wide. JK axles on stock offset wheels and 35 12.50's are 1/4 in narrower then stock xj axles on 4in offset wheels and 35 12.50's. It'll work but I have to stay on stock offset JK wheels...I don't like that. I'm not going over a 35 in tire, if I need to wheel hard I'll take the truggy but I'm trying to get out of the truck and trailer life and go back to driving to the trail...


In that case just put ARBs and chromo axle shafts in the axles you have now. Maybe bump up to 4.88s. It sounds like you'll make the right decision.

Warning two people from our club in NC came home from Moab with broken spartan lockers on 35s.


Sent from my iPhone using Tapatalk
Reply With Quote
  #20  
Old August 10th, 2017, 13:49
Vanimal's Avatar
Vanimal Vanimal is offline
NAXJA Member
 
Join Date: Dec 2011
Location: escondido, ca
Posts: 7,093
Re: Which axles would you use?

My opinion would be stay on 33's and stockish axles (no rcv's, full case locker and cheap alloys at best), jk d44's if going to 35's or 37's with a conservative pedal, or go tons if you are ok with not driving the thing on the street very often and dont care if you roll it.
If i had to choose, i'd stay on 33's with stock axles, which is what i went back to after 37's and tons.
IMO, wheeling is only fun if you have a challenge and you make it off the trail without destroying your rig. The bigger you get, the harder it is to be challenged without the high probability of severe body damage. If you want the challenge of the gnarliest trails, build a buggy and buy a tow rig. If you want to drive across the country, wheel, and drive home, stay where you're at and drive accordingly.
__________________
Quote:
Originally Posted by GSequoia View Post
I always remember to brace myself before doing moderately tight work and get off when really cranking.
Reply With Quote
  #21  
Old August 10th, 2017, 14:14
jonb8's Avatar
jonb8 jonb8 is offline
NAXJA Forum User
 
Join Date: Dec 2007
Location: Elizabeth WV
Posts: 34
Re: Which axles would you use?

Yea I've gone big then back the other way, I went through Lions Den in under 6 minutes this spring. Didn't spin a tire or back up, now doing the Rubicon trail in all but stock xj with 35's and a open front end...LOL That was fun...... I did make Crawl Magazine this month in my truggy, great time......

Reply With Quote
  #22  
Old September 20th, 2017, 20:24
4wheelspulling's Avatar
4wheelspulling 4wheelspulling is offline
NAXJA Forum User
 
Join Date: Sep 2017
Location: Chelan, WA.
Posts: 9
Re: Which axles would you use?

Even though this is an old post, thought I would weigh in. I would sell the JK axles, and put that money into the d30 you have, and build up a junkyard Ford 8.8. 4.88 gears, good spicer u-joints, chrome moly axles and be done. If you get the right Ford 8.8 you get 31 spline shafts and disk brakes too! This is the route I took, even going over kill for my tire size. My build is more of a expedition build. I drive the XJ to my wheeling destination. I am also running small tires! 235/75/15s. I went with new gears, air lockers and chrome moly axles, good spicer u-joints with lock rings. No truss but would like too for the front axle and have the Cs gusseted. Would like to know what you ended up doing with your build?
Reply With Quote
  #23  
Old September 21st, 2017, 06:55
burntkat burntkat is offline
NAXJA Member #1145
 
Join Date: Apr 2003
Location: Charleston, SC
Posts: 799
Re: Which axles would you use?

The more I look into it, the more I think I'm just going to do this to my son's XJ for the front axle:
https://www.youtube.com/watch?v=U6N9zCDyWUs&t=418s

He's only running 31s at present, and won't be doing a lot of wheeling. Certainly nothing hardcore, as this is his only vehicle. But by all means strengthen what he's got. For a couple hundred bucks and some time under the welding hood with him (teaching him a new skill) it's money well spent.

Might never be able to get the money out of it if I sell it- I don't care. Time in service getting him dependably to/from work and school does a lot for that, in my mind.
__________________
-89 S-10: SAS, D44s front/rear. 5.7L V8. 700R4 with 4L60E upgrades. Built in my driveway.
-90 XJ 4.0, AW4, 231J: Clayton's longarms, RE 5.5" coils, hybrid 6" leaf pack, 33/12.50/15" MTs, Rancho 99012s and 99624s, Tera HD SYE, custom sliders, BW flares. Next: finish front, build rear bumpers, Dana 44's front and rear.
-94 ZJ: Budget boost, 31's. The wife's mall crawler. She's gotten inchitis over my S10 though...
-97 XJ: Son's DD. Mild mods for the new driver.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
RCV ultimate dana axles vs Yukon/Superior axles HavvkXJ Modified Tech Discussion 25 March 21st, 2011 09:15
High-strength 29-spline 8.25 Axles; D30 ChroMo Axles XpedientJ Wanted: Private Party Only 2 February 6th, 2007 07:01
axles axles axles: New York xjrugger For Sale: Private Party Only. XJ ITEMS ONLY 3 March 2nd, 2005 06:51
width of xj axles vs. cj axles atowley Modified Tech Discussion 0 June 22nd, 2003 19:15


All times are GMT -7. The time now is 20:39.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014