• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Brown Dog Motor Mounts 2.5 engine

I used these for around 100 miles and they were just too brutal on my D.D., 4 cyl. manual trans. Cherokee. They won't break.
Serial Number 1! Because the mounting plate and width is a bit different with the 4 cyl. and I was the first one to request a pair.
3 inches wide at the bushings. The "triangle" mount bolts are 2 3/4 on center.
I made some mounting cushions to try to help, didn't help enough though.
Web link; http://browndogindustries.com/Jeep-Cherokee-XJ-25L-1991-1996.aspx
50bd1.JPG
50bd2.JPG
50bd3.JPG
50bd4.JPG


$50- if picked up or delivered to the M & G Tues.
$60- shipped anywhere in the U.S.
I take PayPal
Phone call is better than a P.M. most of the time, 562*698/OO89
Thanks, Mike
 
Probably not. IIRC the motor mount "forks" are narrower on the 4 cyl., you might be able to shim the width with some big washers to fit. Also I don't know about the fixed mounting bolts position. I think I ended up using factory CJ mounts which both had the 'tongue' on the base of both mounts.

Mike
 
Back
Top