• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Rear Bumper Tie-In's

Kittrell

NAXJA Member
NAXJA Member
Location
Thornton, CO
I am going to be using this old school home fab tire carrier on the XJ. My concern is that the lower mounts only go up the frame with two anchor points. The plan was to cut these off and go with a set of Nate's tie-in brackets instead.

20170423133054-c80cc805-xl.jpg


20170423133049-54eb9b16-xl.jpg


The issue is it seem's customer service is not his strong point and with Nimrod receiving 2 left brackets and never getting a right, I am hesitant to send any money down the road. Is there anything similar out there?

XJR_TIE_IN-2.jpg
 
I have no input regarding Nate's customer service, but anybody with a sawz-all and drill can fab something similar. Any local welding shop can weld them together.
 
Back
Top