• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Idler pulley

RichP

NAXJA Forum User
Location
Effort, Pa
Anybody got the part number for the bearing, got a bunch of used idlers and just want to do the bearings, should be just push out old ones, push in new ones.
 
Press one out.

Should be the number on the flange (edge) of bearing itself. Usually small numbers - (need magnifier to read on small ones). May need to add letters for type of seals etc.

Also good for doublechecking any new numbers and new bearings themselves.

Good Luck,
Orange
 
Back
Top