• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

What transmission do I have?

Status
Not open for further replies.

woody

NAXJA Forum User
NAXJA Memorial Lifetime Member
Location
NC Sandhills
The following manual shift and automatic shift transmissions were offered on the various XJ/MJ models throughout the production run:

Manual shift:

Asin-Warner AX5:
5-speed in 2.5l I-4cyl models 84-89/90. External slave cylinder. 21-spline output shaft. 4.10:1 axle gear ratio.
Gear Ratios: (1) 3.93:1 (2) 2.33:1 (3) 1.45:1 (4) 1:1 (5) 0.85:1 (R) 4.74:1

Asin-Warner AX15: 5-speed in 90-00 4.0l I-6cyl and 2.5l I-4 models. Earlier versions use an internal slave cylinder, which changed to an external slave cylinder sometime in the mid 90s. 23-spline output shaft. 3.07:1 axle gear ratio.
Gear ratios: (1) 3.83:1 (2) 2.33:1 (3) 1.44:1 (4) 1:1 (5) 0.79:1 (R) 4.22:1

Peugeot BA10/5: 5-speed in 87-89 4.0l I-6cyl models. Internal slave cylinder. 21-spline output shaft. 3.07:1 axle ratio. This transmission is easily identified by its two-piece case… the case halves split horizontally, and there will be an obvious seam along the top & bottom where it bolts together.
Gear ratios: (1) 4.03:1 (2) 2.39:1 (3) 1.52:1 (4) 1:1 (5) 0.72:1 (R) 3.76:1 (*per AMC/Jeep manual 8980 010 302 publ. 03-86)

New Venture 3550: 5-speed in 00-01 4.0l I-6cyl models. External slave cylinder. 23-spline output shaft.
Gear ratios: (1) 4.01:1 (2) 2.32:1 (3) 1.4:1 (4) 1:1 (5) 0.78:1 (R) 3.57:1

Automatic shift:

Chrysler 904:
3-speed in 84-86 2.8l V-6 models. Mechanically controlled shifting.
Gear ratios: (1) 2.74:1 (2) 1.55:1 (3) 1:1 (R) 2.20:1

Asin-Warner AW4: 4-speed in 4.0l 6cyl models 87-01. Electrical (solenoid) controlled shifting. 21-spline output 87-89, 23-spline output 90-01. 3.55:1 axle ratio.
Gear Ratios: 21 spline: (1) 2.8:1 (2) 1.53:1 (3) 1:1 (4) 0.7:1 (R) 2.39:1
23 spline: (1) 2.8:1 (2) 1.53:1 (3) 1:1 (4) 0.75:1 (R) 2.39:1
 
Last edited:
Status
Not open for further replies.
Back
Top